Plan a P5 outdoor LED display or match a replacement module. The ZKDigimax DG01-A2P50M combines a 5 mm pixel pitch with a 320 × 160 mm face and 64 × 32 pixel grid.
Ask NZTeco to check the module against your screen or scope the complete display assembly.
The ZKDigimax DG01-A2P50M is a P5 outdoor LED module for compatible display assemblies and replacement work. Its 320 × 160 mm face contains a 64 × 32 pixel grid. Use it when the planned screen layout calls for 5 mm modules, or ask NZTeco to match it against the hardware in an existing P5 display.
The module is one part of the screen. A complete installation needs compatible cabinets or support, power supplies, receiving cards, a controller and cabling. If your project starts with an empty wall or a new advertising location, explore the ZKDigimax outdoor LED display range and specify the whole assembly together.
A P5 module has 2048 pixels across its 320 × 160 mm face. The same-sized DG01-A2P40M P4 module has 3200. P5 therefore provides fewer pixels within the same physical area. Compare the finished screen’s dimensions, audience position and content before choosing a pitch.
For a large headline, brand graphic or simple promotional message, start by checking how it reads from the intended audience position. Dense text and detailed graphics need more careful assessment. Build artwork to the final screen’s pixel map and test representative content; a physical screen measurement alone does not tell the designer how many pixels are available.
The manufacturer brochure shows a P5 family cabinet with 3 modules across and 6 down, producing a 960 × 960 mm display area and 192 × 192 pixels. This is a planning example for that cabinet configuration, not a guarantee that the module fits every 960 mm cabinet.
The local module listing gives 4500 cd/m² brightness, while the manufacturer’s P5 family brochure specifies at least 5000 cd/m². Confirm the supplied revision’s brightness when quoting, particularly for replacement work. The complete system’s brightness settings and the installation’s ambient light also matter.
The brochure lists up to 40 W consumption per P5 module. Confirm the electrical design for the complete cabinet and screen, including other equipment; this is not a whole-screen or average running-power figure. The family brochure’s front IP65 rating belongs to the cabinet. Outdoor protection depends on the assembled enclosure, seals and installation, rather than an exposed module alone.
Send NZTeco your module details, required quantity and whether the order is for a repair, spares or a new display. For replacement enquiries, include cabinet and receiving-card information if available. For a new screen, send the proposed dimensions, location and sample content.
The image is the outdoor module-family illustration used in the supplier listing. Confirm the actual board layout and supplied revision. The downloadable manufacturer brochure includes both cabinets and modules; use its P5 column and keep cabinet-level ratings separate.
| Model | DG01-A2P50M |
|---|---|
| Product type | Outdoor LED display module |
| Pixel pitch | 5.0 mm |
| Module face dimensions | 320 × 160 mm (width × height) |
| Module resolution | 64 × 32 pixels |
| Pixels per module | 2048 |
| Pixel density | 40000 pixels/m² (P5 family reference) |
| Brightness | 4500 cd/m² in supplier listing; manufacturer P5 family brochure states ≥5000 cd/m². Confirm supplied revision. |
| P5 family interface | HUB75; confirm supplied revision |
| P5 family scan mode | 1/8 scan |
| P5 family module depth | 17.2 mm; confirm mounting and rear-board clearance |
| P5 family module weight | 410 ±10 g; not packed shipping weight |
| P5 family module consumption | ≤40 W; confirm final electrical design |
| P5 family refresh reference | 3840 Hz; verify with matched control configuration |
| P5 family frame frequency | ≥60 Hz |
| P5 family viewing-angle reference | 120° horizontal / 120° vertical |
| P5 family operating temperature | -10°C to 60°C |
| P5 family working humidity | 10–70% RH |
| Protection scope | Front IP65 is a family cabinet rating, not a standalone bare-module claim |
| Supply scope | Module component; confirm included parts and compatibility in quotation |
We’re a Licensed Security Company!
NZTeco Limited is officially licensed under the Private Security Personnel Licensing Authority (PSPLA).
License Number: 24-121944
License Classes: Security Technician & Security Consultant
Expiry Date: 22-11-2029
What does this mean?
It confirms that we meet the legal standards to provide professional and secure services in New Zealand, ensuring your peace of mind and trust in our solutions.
Being licensed ensures compliance with industry regulations, ethical practices, and accountability in delivering Access Control, CCTV, and other security solutions.
For more about the PSPLA and why choosing a licensed provider matters, visit the official PSPLA information page: https://www.pspla.govt.nz/ (opens in a new tab).
