Source the right P4 module for an outdoor LED screen. The ZKDigimax DG01-A2P40M is a 4 mm pixel-pitch module measuring 320 × 160 mm, with an 80 × 40 pixel grid.
Send NZTeco your existing module label and front/rear photos for a matching check.
The ZKDigimax DG01-A2P40M is a 320 × 160 mm LED module with 4 mm pixel pitch for outdoor display projects. It is a useful starting point when sourcing a replacement for an existing P4 screen or planning the module layout for a compatible LED cabinet. The module is one component of the display: the cabinet, power supply, receiving card, control system and cabling need to be specified separately.
For a repair, send NZTeco the existing module’s label and clear front and rear photos before ordering. Matching the dimensions and pixel pitch narrows the selection, but the connectors, mounting arrangement, electrical requirements and receiving-card configuration also need to match.
A 4 mm pitch across a 320 × 160 mm module gives an 80 × 40 pixel grid, consistent with the P4 column in the manufacturer family brochure. That is 3200 pixels per module. The complete screen’s resolution depends on how many modules are arranged across and down, so prepare artwork for the finished display’s actual pixel dimensions.
The brochure’s P4 cabinet example uses a 3 × 6 module arrangement to form a 960 × 960 mm, 240 × 240 pixel cabinet. This is a useful planning reference for the family; it does not establish that a bare module will fit every cabinet of that size. For a complete display project, compare the ZKDigimax outdoor LED cabinet range.
The DG01-A2P40M supplier listing states 4500 cd/m² brightness. The manufacturer family brochure lists at least 5000 cd/m² for its P4 configuration. Confirm the supplied revision’s rating when quoting, especially when matching an existing screen. Brightness should be assessed with the intended location and control settings.
The same brochure gives P4 module consumption of up to 40 W. Use that as a family reference while confirming the final power design, module quantity and other cabinet loads. It is not a whole-screen power figure or a measured average operating load.
Contact NZTeco with the screen model, module photos, required quantity and whether the job is a repair, spare-parts order or new installation. Include any known receiving-card details and configuration files. For alternative screen formats, explore the ZKDigimax LED display range.
The product image is the module-family illustration used in the supplier’s listing. Check the actual rear-board and connector layout before ordering. The downloadable manufacturer brochure covers complete cabinets and their modules; use the P4 column and distinguish module specifications from cabinet ratings.
| Model | DG01-A2P40M |
|---|---|
| Product type | Outdoor LED display module |
| Pixel pitch | 4.0 mm |
| Module dimensions | 320 × 160 mm (width × height) |
| Module resolution | 80 × 40 pixels |
| Pixels per module | 3200 |
| Brightness | 4500 cd/m² in module supplier listing; P4 family brochure states ≥5000 cd/m². Confirm supplied revision. |
| P4 family interface reference | HUB75; confirm supplied module |
| P4 family scan reference | 1/10 scan; confirm supplied module |
| P4 family module weight | 410 ±10 g; not a packed shipping weight |
| P4 family LED encapsulation | 1515 SMD |
| P4 family module consumption | ≤40 W; confirm final electrical design |
| P4 family refresh reference | ≥1920 Hz; dependent on the matched system configuration |
| Brochure scope | DG01-A2 outdoor LED family: separate cabinet and module specifications |
| Compatibility | Confirm cabinet fit, electrical requirements, connector layout, receiving-card settings and calibration |
| Supply scope | Module component. Confirm all included parts in quotation. |
We’re a Licensed Security Company!
NZTeco Limited is officially licensed under the Private Security Personnel Licensing Authority (PSPLA).
License Number: 24-121944
License Classes: Security Technician & Security Consultant
Expiry Date: 22-11-2029
What does this mean?
It confirms that we meet the legal standards to provide professional and secure services in New Zealand, ensuring your peace of mind and trust in our solutions.
Being licensed ensures compliance with industry regulations, ethical practices, and accountability in delivering Access Control, CCTV, and other security solutions.
For more about the PSPLA and why choosing a licensed provider matters, visit the official PSPLA information page: https://www.pspla.govt.nz/ (opens in a new tab).
