Fit more pixels into an outdoor LED display. The ZKDigimax DG01-A2P25M has a 2.5 mm pixel pitch and a 128 × 64 pixel grid within a 320 × 160 mm module face.
Confirm the module revision, mounting, electrical requirements and control configuration with NZTeco before ordering.
The ZKDigimax DG01-A2P25M is a P2.5 outdoor LED module with a 320 × 160 mm face and a 128 × 64 pixel grid. It provides 8192 pixels per module for compatible outdoor display assemblies. Specify it when a new screen calls for a finer pixel pitch, or have NZTeco match it to the hardware already installed when ordering a replacement.
This listing covers the module component. A complete screen also requires suitable cabinets or support, power supplies, receiving cards, a controller and cabling. For a new project, the ZKDigimax outdoor LED display range is the starting point for specifying the full assembly.
Compared with the same-sized DG01-A2P50M P5 module, P2.5 doubles the pixel count across and down: 128 × 64 instead of 64 × 32. That gives four times as many pixels within the same physical face area. It can be a useful option when the planned outdoor screen needs to carry more detailed graphics or is viewed from closer positions.
Choose the pitch around the actual content and audience, rather than screen dimensions alone. Check sample artwork at the closest intended viewing position. Keep promotional messages concise, use text sizes suited to the completed screen, and supply artwork at its final pixel resolution.
The manufacturer brochure’s P2.5 cabinet example uses 3 modules across and 6 down. That produces a 960 × 960 mm display area with a 384 × 384 pixel grid. Scaling the wall changes the total pixel load, so confirm the receiving cards, controller capacity and content workflow as part of the design.
A P2.5 module is not a drop-in upgrade for a P4 or P5 screen simply because the face dimensions match. The pixel map, scan configuration, control settings and electrical design need to suit the selected hardware. For an existing display, identify the original module and confirm compatibility before changing the pitch or ordering parts.
The local module listing states 4500 cd/m² brightness; the manufacturer family brochure specifies at least 5000 cd/m² for its P2.5 configuration. Confirm the supplied revision’s rating when quoting. Assess it with the site’s ambient light and the intended operating settings, especially when matching an existing display.
The brochure lists consumption of up to 30 W per P2.5 module. The complete electrical design must account for the number of modules and the rest of the system. Its front IP65 statement applies to the cabinet: outdoor protection depends on the finished enclosure, seals and installation, rather than a bare module alone.
Contact NZTeco with the quantity, screen size, location and whether the job is a new installation, repair or spares order. For new screens, include sample content and viewing positions. For repairs, include the module photos and any available receiving-card configuration or calibration information.
The product image is the outdoor module-family illustration supplied with this listing. Confirm the actual board layout and supplied revision. The downloadable manufacturer brochure includes both cabinet and module parameters; use its P2.5 column and distinguish the two.
| Model | DG01-A2P25M |
|---|---|
| Product type | Outdoor LED display module |
| Pixel pitch | 2.5 mm |
| Module face dimensions | 320 × 160 mm (width × height) |
| Module resolution | 128 × 64 pixels |
| Pixels per module | 8192 |
| Pixel density | 160000 pixels/m² (P2.5 family reference) |
| Brightness | 4500 cd/m² in supplier listing; manufacturer P2.5 family brochure states ≥5000 cd/m². Confirm supplied revision. |
| P2.5 family interface | HUB75; confirm supplied revision |
| P2.5 family scan mode | 1/16 scan |
| P2.5 family module depth | 17.2 mm; confirm mounting and rear-board clearance |
| P2.5 family module weight | 380 ±10 g; not packed shipping weight |
| P2.5 family module consumption | ≤30 W; confirm final electrical design |
| P2.5 family refresh reference | 3840 Hz; verify with matched control configuration |
| P2.5 family frame frequency | ≥60 Hz |
| P2.5 family viewing-angle reference | 120° horizontal / 120° vertical |
| P2.5 family operating temperature | -10°C to 60°C |
| P2.5 family working humidity | 10–70% RH |
| Protection scope | Front IP65 is a family cabinet rating, not a standalone bare-module claim |
| Supply scope | Module component; confirm included parts and compatibility in quotation |
We’re a Licensed Security Company!
NZTeco Limited is officially licensed under the Private Security Personnel Licensing Authority (PSPLA).
License Number: 24-121944
License Classes: Security Technician & Security Consultant
Expiry Date: 22-11-2029
What does this mean?
It confirms that we meet the legal standards to provide professional and secure services in New Zealand, ensuring your peace of mind and trust in our solutions.
Being licensed ensures compliance with industry regulations, ethical practices, and accountability in delivering Access Control, CCTV, and other security solutions.
For more about the PSPLA and why choosing a licensed provider matters, visit the official PSPLA information page: https://www.pspla.govt.nz/ (opens in a new tab).
